•   Jaw Crusher Cone Crusher Impact Crusher Hammer Crusher HCC Hydraulic Cone Crusher CZS Cone Crusher Vertical Compound Crusher VSI Vertical Shaft Impact Crusher PCL Vertical Impact Crusher
    •   Vertical Compound Crusher
    •   Usage and Application

              The vertical compound crusher is fine crushing equipment that crushes materials in middle hardness, such as rocks and mines with pressure strength less than 210MPa and humidity less than 5%. E.g. limestone, dolomite, cement clinker, iron ore, molybdenum ore, aluminum, cobble, rock phosphorite, copper ore, burned magnesite, serpentine, calces, gypsum, lump coal, zeolite, sandstone and so on. It is widely used in the industry of mining, metallurgy, building materials, fireproof materials, cement, coal, glass, chemical industry, electricity power and so on.



        Pls click any client fon live talk!

        Inquriy For More Information!

        Entering Product Info Underload Center!



       
    • The motor drives the rotor that fixed on the main bearing to run quickly toward certain direction when the vertical compound crusher works. The materials are fallen into the throw-up disc and impacted by the high speed strips of the throw-up disc, and then strikes with the impact board under the effect of Centrifugal Force. Because the impact board is bevel and the gravitation, the materials are threw to the taper crushing room and impacted by the high-rotating up hammerhead. After gaining sufficient energy, the materials are thrown to the impact board again and action repeats. The materials strike with each other in the crushing room and then are down to the column-shape rotor room. Then crushed, pressed, and ground and action repeats. In this way, the materials go through up, middle, and down rotor crushing rooms and crushed, pressed, and ground by the hammers and the impact boards, and finally the materials are gradually crushed into needed sizes and come out.
      The vertical compound crusher has special structure in the part of throw-up disc, which can improve the usage of abrasive material and reduce the cost. The wearing parts are made of anti-abrasion material (metal alloy in high hardness and toughness), so it can endure for long time. It has the advantage of high crushing ratio, large output, high efficiency, and low consumption. It is of easy operation, good performance, low noise, little vibration and good airproofing, so it is a high efficient and high level fine crushing equipment.
    •     Main Specifications
    • PFL-Series


      Model
      Inside Diameter of Roller
      (mm)
      Feeding Size
      (mm)
      Output Size
      (mm)
      Capacity
      (t/h)
      Motor
      Power
      (kw)
      Weight
      (t)
      Overall Dimension
      (mm)
      PFL-750Ⅲ 750 <100 <5,90% 8-20 45 4 2370×1100×1300
      PFL-1000Ⅲ 1000 <120 <5,90% 15-30 55 5.5 2680×1500×1400
      PFL-1250Ⅲ 1250 <150 <5,90% 30-45 90 8.2 2970×1900×1900
      PFL-1500Ⅲ 1500 <180 <5,90% 50-70 132 13.7 3400×2200×2100
      PFL-1750Ⅲ 1750 <200 <5,90% 70-100 160 17.5 3800×2360×2200
      PFL-2000Ⅲ 2000 <220 <5,90% 100-120 185 23 4590×2680×2300


      PFL Series


      Model
      Inside Diameter of Roller
      (mm)
      Main Shaft Speed
      (r/min)
      Feeding Size
      (mm)
      Output
      Size
      (mm)
      Capacity
      (t/h)
      Motor
      Power
      (kw)
      Weight
      (t)
      Overall Dimension
      (mm)
      PFL-800 800 1100 <50 <5,90% 5-15 22 2.1 2000×900×1650
      PFL-1000 1000 980 <80 <5,90% 10-25 45 3.2 2700×1150×1800
      PFL-1250 1250 780 <120 <5,90% 20-40 75 4.2 2900×1350×1850

    •     Note: Any Change of technical data shall not be advised additionally.